One of the more difficult aspects of commercial roofing is shoring up of the roof to avoid leaks. This article will briefly discuss a few ways of fixing these leaks, which could be a non-electrical leak.
One of the major reasons for leaks is debris. We’ve all seen it – usually when the snow starts to fall. While this is not a big issue for residential roofs, it could end up being a huge problem on a commercial roof.
Brickwork on a commercial roof could be full of leaves and dirt and mold, and it will eventually lead to mildew, which is a really big problem for wooden roofing, especially in a wet climate. If the dampness is allowed to go on too long, the moisture level in the area will start to rise.
A timber roof is an obvious place to start fixing a leak. Most commercial roofs use wood for the timber, and so it is less likely to rot unless it’s been improperly maintained. However, the walls of the building can often be full of debris, and it can also become riddled with holes.
The easiest way to solve a leak on a roof is to simply paint the timber. It doesn’t matter if it has been painted by a professional, or if it has been sitting there for some time. In either case, you should spray the inside of the wall with waterproof paint.
Another solution is to sand down the timber. Once you’ve fixed the leak, all you need to do is apply the waterproof paint. Keep in mind that you’ll have to finish the job within a couple of days, so ensure that you can spare a few hours every day to sand down the timber.
If you don’t think that you’re going to be able to fix the leak yourself, you may want to consider the option of repairing the roof yourself. Remember that the material that you’re using is not going to stand up to the water exposure. Any waterproofing needs to be a matter of good engineering.
Waterproofing needs to be of the highest priority, and if a problem does arise, you’ll have to either repair the roof completely or find a replacement roof. In the case of a timber roof, it could take several months before you can get a new one.
Sometimes you can use something as a substitute for a roofing material for a problem like a roofing oil leak. If the leaking occurs beneath the flat surface of the roof, the ordinary kind of asphalt can be used.
However, the most common way that a commercial roofing leak develops is through a leak in the wall, with the result that it expands and contracts. In some cases, the expansion is so great that it damages the wall. This is why you must always repair leaks on a commercial roof.
Timber which has been saturated with water is not an ideal environment for the growth of mold. It’s hard to make out the effects of mold growing on timber that has been saturated with water, but they are there. Waterlogged timber causes the wood to expand too much, causing water to seep in.
You must always remember that timber is less resistant to cracking, so you have to make sure that the cracks don’t form at all. Even when cracks do develop, it’s a much better idea to make sure that the timber is sealed as soon as possible, before any cracks are formed.